Universal - 6241B

Europe's Premier Source for pre-owned Electronic Assembly Equipment

	6241B

	Universal

	Axial

AlternativeSMT takes the risk out of buying used pick & place equipment
Machines are completely refurbished to showroom conditions with worn and damaged parts replaced
Machines can be customised to your needs
Includes full warranty
Full Installation and training available
The cost effective alternative to buying new!

Technical Specification

Cycle Rate: (Factory Verified) Up to 15,000 per hour.
Input Stations: 20 - 220 stations / 20 station models are available.
Insertion Area: 457mm (18') X axis
457mm (18') Y axis
Component Input/Size: 52mm tape reels, ammo packs
26mm reels optional
Dispense Heads: Rotary jumper wire & refire dispensing heads available.
Optional jumper wire dispensing heads used to handle 18, 20, 22, 24 gauge wire.
Dispensing heads are pitch selectable 0.5cm (0.2') and 1cm (0.4002') pitch.
Component Centering: 0.41cm (0.016') non symmetrically shaped components.
All 5.1mm (0.2') components 0.25mm (0.01')
Axis Programming: 0.025mm (0.001') increments
Axis Speed: X and Y: 19.3mm (800') per minute
Machine Accuracy: Within 0.05mm (0.002') of true position
Insertion Head: Symmetrically shaped components
Servo driven variable centre distance
Span changeable under program
7.5mm (0.3') to 21mm (0.85')
optional 5mm (0.2') to 21mm (0.85')
Cut and Clinch: Z2 axis is independantly controlled and may be offset from head by 0.18' clinch angle adjustable 45 to 90 degree clinch angle.
Power Requirements: Electrical:
110 vac, 60hz, 15a (220 vac, 50hz)
Pneumatic:
90psi, 15scfm Insertion Module
90psi, 15scfm Sequencer Module.
Dimensions: Base Machine: H 166cm (66') x W 177cm (70.4') x L 328cm (130')
Add on Module: H 189cm (75') x W 100cm (40') x L 83cm (33')
Noise Level: Less than 78 dba when measured on a centerline with the insertion head, one meter in front of the machine and 1.5 meters above floor level using the 'A' scale.
Net Weight: 1678kg (3730lbs)