AlternativeSMT takes the risk out of buying used MYDATA pick & place equipment Machines are completely refurbished to showroom conditions with worn and damaged parts replaced Machines can be customised to your needs Includes full warranty Available as Total Packages including Feeders at special prices Full Installation and training available Entry Level Package starts at under £6,000 Rebuilt Feeder Magazines from £1,600 The cost effective alternative to buying new!
Optional Auto Ref Points Bad board detection. Boards loaded 180 degrees wrong are rejected if two different ref points shapes are used.
Orientation (rotation) 0.05° resolution for board alignment and optical centering. Assembly program resolution is 1°.
Accuracy ±0.05mm along the X and Y axes. More detailed information about maximum error between component pin and pad available on request.
Resolution X=axes 0.006mm, Y=axes 0.005mm
Placement Area 470 by 290mm to 580 by 538mm.
Placement Force Programmable from 0.6 to 6N in 0.2N steps (0.06 to 0.6kgf).
Missing Component Detection Vacuum and dimension test.
Flexibility Set-up times range down to 2.5 minutes for a completely new set of new printed boards.
Slots The chassis has nine 180mm slots. As standard, two of these are used for the 298mm board carriage and a glue applicator. Optional wider board carriage takes up an adjacent slot.
Programming With joystick and system video camera. Using digitizer or keyboard. Connection to CAD system or host computer database.
Storage Media 5¼' diskette or host computer database
Dimensions Width: 244cm Height without CRT: 141cm Depth: 71cm not including 46cw*38 d extension for board carriage.
Power Requirements 1100VA AC, 50/60 Hz. 100, 120, 200, 220 and 240 V ±10%
Machines are completely refurbished to showroom conditions with worn and damaged parts replaced
